09 Feb 16?
Our friend Alan spotted an Alcort Sailfish for sale up in NY, and he thought we might want it. So he bought it and brought it down to us during his annual Florida run. We in turn bought it from him and also scored a mast and spars for another restoration project on a Sunfish. Her name is Winnie.
The Sailfish is just under 12 feet long and it has a 65 sf sail. The spars measure 11'7" and it has a tiny rudder. This boat was taken apart for refinishing but the previous owner lost interest....17 years ago. It is in great shape and we'll get to it as we finish up on Barbashela and St. Jacques.
The bare hull weighs 92 pounds, came with all the parts. Just needs caulk and paint, yellow paint that is, like she was originally.
Alcort Sailfish logo.jpg
Kind of like a kit boat!
1950s Alcort Sailfish mast step and bow handle after a little teak oil, vinegar and metal polish.
Yep those are bronze rivets.
Check out that mast and wooden spars.
18 May 16: Winnie has her first top coat of Valspar Ultra 4000 Alkyd Enamel, Whipped Apricot. She will remind us of Barbashela. So much so that we decided on her final name, "Winnie."
19 May 16: Skipper loves Winnie, can't wait to get her on the water.
65 sf of sail, 11'7" long, 3' beam, 92 pounds.
65 sf Sailfish sail over a 75 sf Sunfish sail.
21 May 16: Winnie went to the Bagdad Riverfest with Zip. Notice where we painted the sides with Rustoleum Topside Oyster White and added an oak rub strip, stained and sealed with Minwax Polyurethane Mission Oak, attached with #6 brass screws.
23 May 16: Skipper takes Winnie out for the first time in many years. Nice light wind day for a test sail.
26 Apr 17:
We had a question about the length of the rudder assembly carriage bolt on a Super Sailfish. So we went out and measured our Standard Sailfish's bolt which is the same bolt as the Super Sailfish, Super Sailfish MKII and wooden Sunfish. The bolt measured 4 3/4 inches. All of the early Alcort wooden boats and the fiberglass Super Sunfish MKII had a smaller transom than the fiberglass Sunfish. The bolt on the old style rudder assembly for the fiberglass Sunfish is around 7 inches.
Standard Sailfish rudder assembly carriage bolt.
Fiberglass Sunfish rudder assembly carriage bolt (longer).
While I was poking around Winnie I noticed that the transom varnish is kind of crunchy, I think I was in a hurry and used some old varnish. So I'll clean that up and maybe try Total Boat Gleam Satin. I like it on the seat in the Penobscot 14 so far. I also like that JD sends along a free application kit with the varnish that includes 2 paint pots, 2 stir sticks, 2 foam brushes, 2 paint strainers, and a pair of latex gloves FREE (a $10 value).
14 Jun 17:
1953 Alcort Sunfish Zip and 195? Alcort Standard Sailfish Winnie hit the high seas for a messabout today. As always it was a treat to rig these simple boats. Drop the mast through the gooseneck, raise the sail, clip the sheet, clip the daggerboard retainer and pin the rudder. Add a PFD and they're ready to go.
Skipper wore her new hat, a gift from WoodenBoat to commemorate the Relaunching of Winnie in 2016. They were both featured in WoodenBoat Magazine number 257.
Light winds, warm temps made for a peaceful sail. Both boats tacked and gybed beautifully. Winnie sailed with a longer Barrington style daggerboard and the extra 8 inches provided a nice foot rest for the Skipper. Her vintage silk sail sets beautifully and the elephant ear rudder answered the helm at every turn.
Zip cruised with ease, powered by a race cut sail from Schurr Sails Pensacola. Normally too much sail, it was perfect for the zephyr experienced today. She made a very stable camera platform and the cockpit provided a comfortable seating area.
to be continued...